Z-STRIP - Non-Ammoniated Floor Wax Stripper

Z-STRIP - Non-Ammoniated Floor Wax Stripper

$49.95
  • Size

Non-Ammoniated Wax Stripper

Dilution: 1:4 - 1:8

  • Economical and concentrated.
  • Excellent stripper for use with scrubbing machines and black pads.
Where To Use
Floors that have not been regularly burnished, i.e. schools or small offices with minimal finish coats.
Vinyl Tile Asphalt Tile Asbestos Tile
Rubber Tile Concrete Terrazzo

Dilution
Heavy stripping – 1/4 (32 oz./gallon)
Medium – 1/8 (16 oz./gallon)
Light – 1/16 (8 oz./gallon)

Directions
Dust mop and scrape gum, etc. from floor.  Determine dilution from table 
above and add appropriate amount of product to warm water.  Apply solution 
generously to a workable area.  Allow solution to sit for 5-10 minutes.  Floor 
must remain wet.  Agitate solution with floor machine using an aggressive 
stripping pad (black or brown).  If needed, hand scrub edges and corners 
with edge pad or center of the scrubbing pad.  Pick up with wet vac or 
mop and rinse thoroughly.  Inspect entire floor to ensure stripping has been 
complete.  Reapply to areas that require additional stripping.  Allow floor to 
dry completely prior to applying sealer or finish.  
Technical Specifications
COLOR:  ............ Transparent, red VISCOSITY: ..................Water Thin
FORM:  .............. Liquid STORAGE(Unopened):..1 Year @R.T.
SCENT:  ............. Odorless BIODEGRADABLE:   ...Yes
pH:   .................... 14.0 WEIGHT/GAL:   ............9.0
FLASH POINT:   None SHIPPING CLASS:  ......8, Packing Gr III
FOAM:  .............. Low PACKAGING:   ..............4x1, 5 gal, 55 gal
TYPE: ................. High Alkaline Stripper