A noncorrosive, non-ammoniated, solvent based stripper for the removal of metal cross-linked floor finishes from a variety of floors.
- Quickly liquifies finish for easy removal.
- High dilution.
- Super aggressive for the toughest stripouts.
Where To Use: Asphalt, Tile, Rubber Tile, Vinyl Tile, Linoleum, Terrazo, Concrete & Other floor surfaces except wood.
Light Stripping: Dilute 1 part product with 8 parts water.
Regular Stripping: Dilute 1 part product with 4 parts water.
Heavy Duty Stripping: Dilute 1 part product with 2 parts water.
DIRECTIONS: Dust mop and scrape gum, etc. from floor. Dilute product into a mop bucket according to the directions above. Apply solution generously to a workable area. Allow solution to sit for 5 to 10 minutes. Floor must remain wet. Agitate solution with a floor machine using an aggressive stripping pad (black or brown). If needed, hand scrub edges and corners with an edge pad or center of the scrubbing pad. Remove the old finish and stripping solution with a mop or wet vac. Inspect entire floor to assure stripping has been complete. Reapply to areas that require additional stripping and pick up solution. Allow floor to dry completely prior to applying sealer or finish. Rinsing is not necessary but ensures a good, clean, residue free floor.