Take a crack at DIY concrete, wood & metal repair with EPOXY PATCH
- 100% Solid epoxy filler for cracks, holes and pits
- Bonds to concrete, asphalt, wood and metal
- Can be feather-edged for the perfect finish
- Comes with all 3 components in sturdy plastic pail
- Can be used for anchoring equipment, including posts and signs
- 100% waterproof
- Perfect to be applied to cracks up to 1 inch thick
- 50lb pail covers 10-15 Square Feet & 25lb pail covers 5-8
- The density of the epoxy mix is like a paste
Don’t let your curb appeal slip between the cracks. Epoxy Patch is a unique epoxy patching system designed to fill and resurface cracks, holes and pits in a variety of surface types -- not just concrete. Its ultra-strength patching formula is easy to use and even works under the most extreme weather conditions including rain. You can even feather-edge the mortar for the perfect finish.
Epoxy Patch comes with all three components needed to create a strong epoxy patching system (resin, hardener and aggregate). Use Super Patch indoors or outdoors; in basements or on slabs; in parking lots or in broken brick. It’s strong, versatile and quick to bond.
It all starts with a crack. Prevent potholes from forming in your driveway, parking lot, & roadways.
Rain or snow seeps into the pavement, often through small cracks in the road surface, and saturates the sub base and soil below.
During cold spells, the moisture freezes and the ground expands, pushing up and breaking the road surface.
When temperatures rise, the ground contracts to it's normal level, but the fractured and raised road surface is weakened by the cavity and the ground below.
This damaged road surface cannot support the weight of passing vehicles and begins to break down and collapse into the hollow space.
Prevent a pothole from forming immediately by filling any concrete cracks with our epoxy patching system. Our product will start to harden in about 1 hour, allowing you to safety drive over it after 2 full hours of curing. Plus, it'll very slightly expand completely filling the problem area.
Everything you need for the mixture is right in the pail. Combine parts labeled A & B in the container for three minutes. Then add the aggregate in small amounts until the combined material is moist and easy to spread. This can be done by hand with a mixing stick or with an electric drill mixer.
And just like that, you have the perfect concoction for repairs and anchoring equipment, including posts and signs.
For best results:
Before you apply any of the epoxy mix, wash the surface to clear loose aggregate, dust, dirt, grease and oil. Once you create the mix, trowel it into and over any cracks, holes or pits in the surface.